Vertical Rollerskating

Vert-Skating-Forum

Message 4243 (30. Nov. 2007 01:32) (Tree)

ireNe
Toecaps
I ordered several pairs years ago from K2 inline skates, their model then was the FatBoy.
These look good, if you can get some.
  Write reply

Replies

ireNe: Finally did it! (27. Nov. 2007 01:04)
 Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
Total weight (each skate): 4 pounds
I will post the weight of each component (for those who care to know)
Soon I hope to slide around corners with pool coping!
  Write reply
claudine: Finally did it! (27. Nov. 2007 03:07)
 Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.

So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.

And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.

So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.

: Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
: The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
: Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
: Total weight (each skate): 4 pounds
: I will post the weight of each component (for those who care to know)
: Soon I hope to slide around corners with pool coping!
  Write reply
joe90: Finally did it! (27. Nov. 2007 03:19)
 Awsome Irene, luv your work, they should slide a treat.

cheers joe

: Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
: The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
: Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
: Total weight (each skate): 4 pounds
: I will post the weight of each component (for those who care to know)
: Soon I hope to slide around corners with pool coping!
  Write reply
zorg: Finally did it! (27. Nov. 2007 11:04)
 Great work Irene!!!!! I use a chair as worktable too, in my kitchen.... Do you use your left foot to hold the piece you cut or drill with your right hand too ??
The weight is low too. If you want to decrase it, the next step is to replace all the axis by high grade ones (Al or titanium, or t least CrMo steel), bearings are also heavy....

: Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
: The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
: Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
: Total weight (each skate): 4 pounds
: I will post the weight of each component (for those who care to know)
: Soon I hope to slide around corners with pool coping!
  Write reply
ireNe: Finally did it! (28. Nov. 2007 00:20)
 Thanks :-)
Is your question whether I drill goofy or regular?
I guess regular, since I'm a righty.

: Great work Irene!!!!! I use a chair as worktable too, in my kitchen.... Do you use your left foot to hold the piece you cut or drill with your right hand too ??
: The weight is low too. If you want to decrase it, the next step is to replace all the axis by high grade ones (Al or titanium, or t least CrMo steel), bearings are also heavy....
:
: : Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
: : The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
: : Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
: : Total weight (each skate): 4 pounds
: : I will post the weight of each component (for those who care to know)
: : Soon I hope to slide around corners with pool coping!
  Write reply
ireNe: Finally did it! (28. Nov. 2007 00:22)
 thanx joe...i hope yur right :-)

: Awsome Irene, luv your work, they should slide a treat.
:
: cheers joe
:
: : Thanks to all the inspiration gotten from all you rollerskaters out there (you know who you are), I have finally put my new ride together. After much contemplation (procrastination) and several changes, they're done. Pleased with how it turned out, I'm not sure when I will have the chance to test ride them. Our city parks are closed and the indoor ones require me to hitch a ride. I hope to ride them this Sat, oh please....make it happen. It's also rainy and cold outside. I realise why it took me years to do this...it's alot of work with just a jigsaw and a drill in my apt, using a chair as a worktable.
: : The final setup: Riedell Retro Sport boot, K2 inline toecap, Tracker plate, Krux baseplate, Indy 109mm hangars, Crap bearings, unknown blank wheels.
: : Sliders: Home Depot chrome 5/8" sq. towel bar ($.99 each) and Powell Rib Bone rails.
: : Total weight (each skate): 4 pounds
: : I will post the weight of each component (for those who care to know)
: : Soon I hope to slide around corners with pool coping!
  Write reply
ireNe: Finally did it! (28. Nov. 2007 00:23)
 
: Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.
:
: So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.
:
: And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.
:
: So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.
  Write reply
ireNe: Finally did it! (28. Nov. 2007 00:33)
 thanx. I decided to cut the toe stopper area off the plate, taking off another 0.5 ounce. I'm gonna try these wheels and bearings or put on the ones I'm riding now. These are literally CRAP bearings ;- )
yep, drilled holes to mount my small heels, boots are a size 5, on sale for $30+10 ship. yep, pump out after bailing in bowls. the LA crew really use their toestoppers well to get out, i still haven't master that move yet.

: Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.
: : So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.
: And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.
: : So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.
  Write reply
claudine: Finally did it! (28. Nov. 2007 02:03)
 Well, got to post this, Holly can dig me in a hole with her toe stops lol! She can run up ramps and everything with them. I haven't learned how to use them really nor how to stop going downhill either lol. They hit on the humps I like to go over and add weight. So I left them off.

So you cut the tips off with a jigsaw? I might do that cause the toe stops would also be in front of my toe so probably not useable. Where did you get those toe protectors? I just used gaffers tape on top of leather on my plates since they are too long. So far its working.

The inliners love Crap bearings, mine are just CRAPPY hahaha!

Hey, let us know how they roll. They look sweet! You win the award on creativity. ;-D I saw a nice marble ledge today, no skate stoppers on them, humm.....looks like I'm gonna get my butt into trouble, woo-hoo! Slip slidin away!!

: thanx. I decided to cut the toe stopper area off the plate, taking off another 0.5 ounce. I'm gonna try these wheels and bearings or put on the ones I'm riding now. These are literally CRAP bearings ;- )
: yep, drilled holes to mount my small heels, boots are a size 5, on sale for $30+10 ship. yep, pump out after bailing in bowls. the LA crew really use their toestoppers well to get out, i still haven't master that move yet.
:
: : Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.
: : : So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.
: : And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.
: : : So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.
  Write reply
Robert: Finally did it! (28. Nov. 2007 04:18)
 Those skates are F'n awesome. I am so jealouse of your plate and sliders. I use rollergirls grind plates and think they are awesome, but I would like more room to latch on to the coping. I am used to having a bent jump bar against my plates and actually clasping on. Claudine, as I said in my other post, please give toe stops a try. I don't see how they can get in the way and they save your wheels from getting flat spots. When I was young, I used to go straight down a very steep hill and I had to stop at the bottom before I hit the rain gutter or whatever you call those things as well as cross traffic. I would probably go 30 miles an hour and just jump backwards and stop with in ten feet. I love toe stops. I definitely do not like the ones on my skates. I am used to the ones that are attached to a huge screw that screws into your plate. I have the ones that attach my a separate tiny screw and they get really loose all of the time. You guys/gals are really motivating me to set aside my pain and hit the park. I really would like to share some oldschool parellel vert skating with you. It won't compare to some, but won't be half bad. : )

: Well, got to post this, Holly can dig me in a hole with her toe stops lol! She can run up ramps and everything with them. I haven't learned how to use them really nor how to stop going downhill either lol. They hit on the humps I like to go over and add weight. So I left them off.
:
: So you cut the tips off with a jigsaw? I might do that cause the toe stops would also be in front of my toe so probably not useable. Where did you get those toe protectors? I just used gaffers tape on top of leather on my plates since they are too long. So far its working.
:
: The inliners love Crap bearings, mine are just CRAPPY hahaha!
:
: Hey, let us know how they roll. They look sweet! You win the award on creativity. ;-D I saw a nice marble ledge today, no skate stoppers on them, humm.....looks like I'm gonna get my butt into trouble, woo-hoo! Slip slidin away!!
:
: : thanx. I decided to cut the toe stopper area off the plate, taking off another 0.5 ounce. I'm gonna try these wheels and bearings or put on the ones I'm riding now. These are literally CRAP bearings ;- )
: : yep, drilled holes to mount my small heels, boots are a size 5, on sale for $30+10 ship. yep, pump out after bailing in bowls. the LA crew really use their toestoppers well to get out, i still haven't master that move yet.
: :
: : : Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.
: : : : So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.
: : : And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.
: : : : So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.
  Write reply
claudine: Finally did it! (28. Nov. 2007 04:56)
 I do have toe stops for my street skates. So yeah, need to learn that spin and hit toe stop stop! If I hit something and hit a knee, I slide for 100 meters or more lol. No stopping! At the park I just spin to stop. I'm not sure since my plates are so long, that a toe stop in front of my toes would even work???? My dominions are an inch too long and I cant really get on those toe stops at all. I will keep my parts for toe stops and keep this in mind for later.....

Robert, I say skate, just ease into it this time so you gradually get healed and in shape. I'm getting into shape but its slow. I plan on being really strong and lookin good by spring! I hope to at least sport some nice grabs, airs, jumps and a few slides. I'm really dying to start sliding! Its KILLING me. I want to order a new knee lol.

: Those skates are F'n awesome. I am so jealouse of your plate and sliders. I use rollergirls grind plates and think they are awesome, but I would like more room to latch on to the coping. I am used to having a bent jump bar against my plates and actually clasping on. Claudine, as I said in my other post, please give toe stops a try. I don't see how they can get in the way and they save your wheels from getting flat spots. When I was young, I used to go straight down a very steep hill and I had to stop at the bottom before I hit the rain gutter or whatever you call those things as well as cross traffic. I would probably go 30 miles an hour and just jump backwards and stop with in ten feet. I love toe stops. I definitely do not like the ones on my skates. I am used to the ones that are attached to a huge screw that screws into your plate. I have the ones that attach my a separate tiny screw and they get really loose all of the time. You guys/gals are really motivating me to set aside my pain and hit the park. I really would like to share some oldschool parellel vert skating with you. It won't compare to some, but won't be half bad. : )
:
: : Well, got to post this, Holly can dig me in a hole with her toe stops lol! She can run up ramps and everything with them. I haven't learned how to use them really nor how to stop going downhill either lol. They hit on the humps I like to go over and add weight. So I left them off.
: :
: : So you cut the tips off with a jigsaw? I might do that cause the toe stops would also be in front of my toe so probably not useable. Where did you get those toe protectors? I just used gaffers tape on top of leather on my plates since they are too long. So far its working.
: :
: : The inliners love Crap bearings, mine are just CRAPPY hahaha!
: :
: : Hey, let us know how they roll. They look sweet! You win the award on creativity. ;-D I saw a nice marble ledge today, no skate stoppers on them, humm.....looks like I'm gonna get my butt into trouble, woo-hoo! Slip slidin away!!
: :
: : : thanx. I decided to cut the toe stopper area off the plate, taking off another 0.5 ounce. I'm gonna try these wheels and bearings or put on the ones I'm riding now. These are literally CRAP bearings ;- )
: : : yep, drilled holes to mount my small heels, boots are a size 5, on sale for $30+10 ship. yep, pump out after bailing in bowls. the LA crew really use their toestoppers well to get out, i still haven't master that move yet.
: : :
: : : : Oh wow Irene, you did an awesome job!! Mine weigh an ounce or so more lol. And you have wider hangers, really good job.
: : : : : So why crap bearings? I would think the swiss ones you had would be faster. I need faster bearings. I think I will try the Missiles. Mine are crap literally lol.
: : : : And your baseplates. Did you drill a hole between them so you could attach them to the heel? With mine, if my kingpin ever breaks, if I cant get plastic ones it will be hard. I love my trucks and know I cant go wider cause I would seriously lock wheels if I did. My plates and trucks will probably not change til I die. I might move the center of my sliders closer to the front. Thats it for changes for me for my skates I think. I'm pretty darn happy with mine.
: : : : : So when you bail in a bowl, do you pump out too? I dont like the toe stops. They get in the way on the humpty-humps.
  Write reply
ireNe: Toecaps (30. Nov. 2007 01:32)
 I ordered several pairs years ago from K2 inline skates, their model then was the FatBoy.
These look good, if you can get some.
  Write reply
ireNe: Toecaps (30. Nov. 2007 01:34)
 : I ordered several pairs years ago from K2 inline skates, their model then was the FatBoy.
: These look good, if you can get some.

Model: K2 Skates Front-Man
  Write reply
Go to the Vert-Skating-forum